Customized wardrobe sliding door and track installation method
[ Chinese wardrobe net ] Due to the ease of use, most home wardrobes now choose sliding doors, but for the installation of sliding doors, I believe many consumers have never known. The core of the wardrobe sliding door installation is the installation of the track. Therefore, the next small series will introduce you to the wardrobe sliding door and rail installation method.
1. The size of the track box on the upper part of the sliding door should be 12 cm high and 9 cm wide. Like the curtain box, a rail is mounted in the track box to suspend the sliding door from the rail. When the height of the door is less than 1.95 meters, it feels very depressed. Therefore, when you are doing sliding doors, the door height must be at least 195 + 12 = 207 cm.
2. The gold size of the normal door is about 80 cm × 200 cm. Under this structure, the door is relatively stable and beautiful. Therefore, the ratio of the width and height of the sliding door should be similar to the size of the gold.
3, we must be careful to use the sliding door from the floor to the top (bright hanging track box). Since the swing amplitude is too large when pushing and pulling, the sliding door is easily deformed after a long time, and the door cannot be opened after the deformation, which means that it cannot be repaired and cannot be used.
4. Finally, install the sliding door rail: fix the upper rail, use the gravity cone (hanging hammer) to hang 3 points on the upper and middle points of the upper rail and draw 3 points on the ground with the oil pen to install the upper rail, then install the upper rail. Put a hammer to the ground at the center point of the upper track. Vertical lines should be placed at both ends of the track. The lower track is fixed at these three points to ensure that the upper and lower rails are completely parallel, and the sliding of the sliding door is optimal. The state is gone.
The above is about the custom wardrobe sliding door and its track installation method, I hope to help friends who have this need!
Outdoor furniture covers are polyester outer sell with PVC coating inside, keeps the elements out covers wipe clean with a damp cloth and mild soap, with a high seam strength and durability, don`t fade or crack in the sun.
Our outdoor furniture covers provide an unparalleled level of protection for your outdoor furnishings. Designed with meticulous detail, these durable covers with polyester outer shell and a layer of water-resistant PVC to ensure superior performance and long-lasting functionality in searing sun, blinding rain, prodigious snow, and bitter cold.
• Lined with a layer of water-resistant PVC
• Soft fleece underside protects aluminum frames
• Won't fade in the hottest sun, or crack in temperatures dropping to 0°F
• Elastic edging and/or reinforced ties hold covers securely in place
If you have any questions, please contact with us directly. Outdoor Furniture Covers are produced by Golden Eagle Outdoor Furniture With High Quality and Good Appearance. Welcome you visit our Factory. For any inquiry,Please send mail directly to us.
Outdoor Furnniture Covers,Outdoor Furnniture Rain Covers,Outdoor Covers For Furniture,Outdoor Patio Furniture Covers
Golden Eagle Outdoor Furniture Co., LTD. , https://www.gepatio.com