5 strokes to extend the life of your fingerboard
Finger joint board, the finger joint board is made up of multiple pieces of wood board, and the upper and lower sides no longer stick to the splint. Because the vertical wood board adopts a zigzag interface, it is similar to the crossover of two fingers. As with the use of wood board, the fingerboard is much less glued than wood board in the production process, so it is a more environmentally friendly board than wood board. More and more people have begun to use finger joints. The board replaces the wood board.
The wood core board, also known as the blockboard, is stronger than the finger joint and is not easily deformed. However, it needs to be used together with the veneer to achieve the decorative effect. According to the materials used, the wood core board has poplar wood core board and Chinese fir wood core board. The poplar wood core board is made of compact material and has good nail holding power. The fir wood core board is loose and easy to open, but it will have a service life due to poor nail holding force. short.
The finger joint plate belongs to solid wood, and the wood board is wood-based board. Therefore, the fingerboard has a natural texture. Give people a return to the natural feeling. Whether furniture is environmentally friendly is mainly based on the amount of formaldehyde released. Class E1 (formaldehyde emission less than 1.5mg/L) refers to the board and E1 grade wood board. If the amount of formaldehyde released is the same. That is the same environmental protection. However, the finger joint plate has less glue than the wood board. It is generally easier to control environmental protection. There are also splints on the board (both by sticking) and formaldehyde is also produced. There is no splint on the fingerboard, and the wood board has. The fingerboard and wood board can be distinguished by the naked eye. So the question is how to maintain the finger joint board? Especially the solid wood rubber wood finger joint board bathroom cabinet, because the bathroom space is a humid environment, if you do not carry out good maintenance in the process of using the solid wood bathroom cabinet, it will only greatly discount its natural service life, how to maintain Solid wood bathroom cabinets are a big concern for modern home living people. Let's take a look at how to maintain the direct board with Xiaobian!
1. Keep away from heat sources. It is best to place the bathroom cabinet at a distance of about 1M from the heating flow during installation to avoid high-temperature baking for a long time, causing local cracking of the wood, deformation and deformation, and local deterioration of the paint film.
2. Avoid direct sunlight. Outdoor sun exposure should be avoided as a whole for long-term exposure to the whole or part of the bathroom cabinet. It should be placed in a place where it can escape from the sun, or be separated by direct sunlight. In this way, it does not affect the indoor lighting, but also soft light to add a warm and romantic atmosphere to the living room, while protecting the indoor bathroom cabinet.
3. If the surface of the solid wood bathroom cabinet is stained, avoid using alcohol, gasoline or other chemical solvents to remove stains. If the surface of the bathroom cabinet is stained, do not rub it hard. Use warm tea to remove the stain gently. After the water evaporates, apply a little light wax to the original part, and then gently grind it several times to form a protective film. Here is an article for everyone to talk about the advantages of rubber wood finger joints.
4. Avoid hard objects scratching. When cleaning, do not let the cleaning tools touch the bathroom cabinet. Usually, be careful not to let the hard metal products or other sharp objects collide with the bathroom cabinet to protect the surface from scratches.
5. Avoid wet conditions. In the summer, if the room is flooded, a thin rubber pad should be used to separate the bathroom cabinet from the ground, and the wall of the bathroom cabinet should be kept at a gap of 0.5-1.
For the above-mentioned problems about the application of rubber wood finger joints in the application, it is better to let us know how to protect it and extend the life.
Editor in charge: Li Zhuang
The Silicone Coin Purse is more convenient to carry, comfortable to feel, and easy to clean, so that the most things can be packed in the smallest space. Digital printing, silk-screen printing, and other printing methods and accessories combination for relevant design, is the combination of practicality and aesthetic culture.
Silicone Coin Purse,Silicone Purse,Silicone Coin Pouch,Silicone Change Purse
Jilin Y.F. Import & Export Co.,Ltd , https://www.jlpencilcase.com