Some friends did not purchase the CD-ROM when they bought the computer, or some friends bought a new CD-ROM to install, then how to install the CD-ROM drive to the computer, how much is the computer CD-ROM drive? In fact, the current computer CD-ROM installation is very simple, mainly to drive the CD-ROM Connect the power cable and data cable. The following small series will introduce you to everyone:
1. We first remove the baffle above the mainframe, usually with two screws fixed, unscrew it, and then pull the bezel out. We can remove the bezel from the side where the motherboard jack is small.
2. Usually you will get a SATA serial data cable when you purchase the optical drive.
3. We can see behind the optical drive that the current optical drive usually has two interfaces, one is the data cable interface of the optical drive, and the other is the power cable interface of the optical drive. The current interface is usually not connected wrong, and has anti-plugging Design, the data line can not be inserted if the direction is wrong.
4. On the motherboard of the computer, you can see the SATA interface of the motherboard here, one of which is to connect to the serial hard disk, the other is to connect to the computer CD-ROM drive. It is also possible to connect the data cable of the optical drive and the hard disk. Usually STAT1 is connected to the hard disk and SATA2 is connected to the optical drive.
5. In order to let everyone see the connection method, we first connect, one end of the data line is plugged into the SATA interface of the computer, and the other end of the data line is inserted into the data line interface of the optical drive.
6. We can find the flat power cable interface for connecting the optical drive or hard disk to the power supply that comes with the computer. We only need to connect this power cord to the optical drive. Very simple, everyone can do it yourself.
7. We understand how to connect, now we only need to remove the plastic baffle above the front of the computer case, and then insert the CD drive from the outside into the computer.
8. We screw the optical drive to the main unit, and then connect the optical drive power cable and data cable correctly according to the above instructions, so that the optical drive is installed.
    How much is the computer drive? Mainly based on the quality and brand of the optical drive to decide, I hope the above introduction can help everyone.
Hand-Woven Bag,Hand Woven Bags,Handmade Straw Bags,Straw Handmade Bag
Shandong Guyi Crafts Co.,Ltd , https://www.guyicraft.com