[ Chinese wardrobe net ] When it comes to custom-made wardrobes , most people think that they are furniture that is directly made by the factory. In fact, there is also a kind of custom furniture, that is, the wardrobe made by the carpentry on the spot. The two kinds of wardrobes have their own characteristics. Which of the two custom wardrobes is better? Let's compare it objectively!
There are two ways to customize the wardrobe, one for the woodworking site, and the other for the custom-made furniture factory. Is the factory fixed or is it done on the woodwork site? Or is it good to buy finished furniture?
First, veneer
Woodworking Wardrobe: Generally, a large amount of glue is used for gluing. The flatness and the rubber are easy to be neglected. It is necessary to pay special attention to the cabinet.
Customized wardrobes: glue is also used, but the quality of the glue can be understood from the certificate, as well as the licensing cycle.
Second, edge banding
Woodworking Wardrobe: This is the pain of the woodworking wardrobe forever, can not be solved perfectly; can not use the machine edge banding like the big factory, the fly in the ointment.
Customized wardrobe: This is the strength of the machine cabinet. Super pressure and glue can achieve very beautiful results, but you need to pay attention to the texture and color of the edge band, whether it can be consistent with the cabinet of all colors.
Third, the plate
Particle board, MDF PK finger joint board, wood board
In addition to a small number of high-end solid wood furniture custom, most custom furniture manufacturers generally use particle board, MDF as a substrate to customize furniture, and woodworking site commonly used wood board, finger joint board.
Why does the woodworking site do not use particle board? In the woodworking eye, the particle board is the wood slag, which is very poor and falls off the grade. Why do a lot of renovated woodworkers say this? Because the manual machinery in their hands can't use the particle board to make the cabinet on the spot! When the saw goes down, the board bursts, and the edge board is scrapped, and the wood board and the fingerboard , manual mechanical operation, at least not bursting.
Therefore, in the eyes of woodworkers, wood board and finger joint board are their treasures. Eighteen martial arts are all based on it. Can you dislike it? The particle board is like the lady in the city, wearing beautiful clothes and full of foreign spirits. It can be tempered and needs to be served. Fragile particleboards must be machine-machined (eg, electronic cutting saws). This good sawing effect is the key to good edge sealing.
Let me talk about the edge of the woodworking site, hand-adhesive, it is a bit similar to the opposite sex in the factory = type of edge banding, but also by hand, there is a semi-automatic hot melt coating machine in the factory, by hand The wood slag and the edge of the wood board are glued and sealed.
Fourth, the production process
Factory-based production, due to the requirement for a certain amount of production capacity and processing quality, generally uses large machinery to complete the production. Therefore, the product has high precision, good sealing edge and beautiful appearance, and high installation precision.
The furniture is made on site, even if the samples you see are OK, but the precision of the furniture made by your home may not be in a grade. Because on-site production depends entirely on the craftsmanship of the woodworkers.
V. Environmental issues
Because the country has mandatory environmental standards for wood-based panel products, the national standard is E1, and the European standard is E0. However, the environmental protection of furniture is not limited to the environmental protection requirements of the board. For example, the sheet can reach the E1 and E0 grades, but in the secondary veneer processing, the edge sealing glue problem is not well controlled, it will still cause the furniture formaldehyde to exceed the standard. Some manufacturers that have updated faster have begun to promote aldehyde-free plates. The edge-sealing glues use American MDI glue and soy protein glue.
The furniture produced on site has a large amount of urea-formaldehyde resin glue used inside the wood board. The formaldehyde content is high. Because the product structure is glue and nail, a lot of glue is needed during processing. Most of the glue used has formaldehyde exceeding the standard, so the site is made. Furniture is extremely environmentally friendly. Especially when there are owners present, in order to show that they don't cut corners, the things on the spot are strong, and they may also say "Give you more glue". I don't know if the formaldehyde content of the furniture made is higher.
6. Moving
Woodworking wardrobe: generally fixed with a round nail, can not be dismantled, because the dismantling will cause devastating damage to the cabinet and the backboard, affecting the reuse of the cabinet.
Customized wardrobes: Most of them are fixed with fasteners and can be removed. When the size of the dismantling environment is not met, local adjustments can be made by means of partial modification or replacement.
On-site management: There is no problem of on-site production in the factory. It only needs to be installed directly when the decoration is basically completed. Since the connection is made with special connectors, the installation is now simple and quick, and the advantage of custom furniture is that it is detachable and can be expanded and added.
Seven, the overall effect
Factory-customized furniture is beautiful and pleasing to the eye thanks to the use of formed panels, clear lines, color and moisture, and no need for post-painting. The scientific mechanical design also guarantees the stability and durability of the cabinet. Customized furniture will be more and more popular among young people and environmentalists because of its simplicity, environmental friendliness, and low price. It will be highly regarded in the future for a long time.
At present, in the custom furniture industry, manufacturers have developed their own product sales design system. Before ordering the product, they can provide the owner with the overall furniture installation effect map according to the owner's room size and personality requirements. In the purchase!
Eight, after sale
Woodworking Wardrobe: Most of the decoration teams are generally not seen after the installation, basically no after-sales, the decoration company will generally carry out after-sales service, but most of them can not be timely.
Customized wardrobes: Generally speaking, it is more secure during the warranty period, but the time requires a cycle.
Nine, the solidity of the furniture structure
Factory customization has taken into account the solid problems in design, whether in theory or in practice, the fastness of the composite hardware connector is not inferior to the nails and glue of the woodworker. If it is difficult to disassemble, the disassembly of the combination hardware is much more difficult than the connection between the nail and the glue! Because the woodwork has fixed the plate, the feeling seems to be firmer. In fact, this is a misunderstanding. Do not believe that everyone can test, we can provide the same two plates connected according to different processes, to see which is difficult to pull the disassembly?
X. Cost control and quality management
This is critical! The cost control of the factory is based on the development of a company, product competition, and cost control of large-scale production. Quality management is based on advanced production process control to bring a single product qualification rate, user satisfaction and reputation.
For example: before the factory saws the board, it will summarize a batch of order customers, and the person will count the amount of the board, and then use the software to optimize the sawing board, so the utilization rate of the board is high. And it will not let the customer bear the loss caused by the fault of others when selling again. In the aspect of production process management, the main test is to install it. The products shipped to the customer's home have been installed once in the factory. There is no problem in the structure. There is no problem in opening and punching. Everything is OK before packing.
Hotel Furniture Series,Night Table Parts,Dressing Table Parts,Lounge Chair Parts
SHENZHEN CHANGJIANG FURNITURE CO., LTD , https://www.findcjf.com