1. Measure the wheel: Place the child's cart on a flat surface to see if it can be placed smoothly (the unevenness of the wheel should be less than 5mm). Push the line straight and test if it deviates from the straight line. Push the “∞†shape to push it to see if the wheel rotation is flexible.
2. Look at the handlebar: The surface of the paint film should be smooth and smooth without peeling, cracking, paint leakage, wrinkle skin and aggregate sand particles. If it is a plastic injection part, the surface should be smooth and flat, and the thickness of the coating should be uniform. There should be no exposed bottom, stain, or color mixing defects.
3, look at the appearance: the use of visual inspection and hand touch method to check whether the baby can touch the exposed area of ​​the open tube, whether there are dangerous cracks and sharp edges, sharp corners, burrs.
4. Test the brakes: Depress the brake lever, push hard and push forward, and observe if the brake lever trips or slides. In addition, the brake lever is preferably marked with a clear color so that it can be prevented from being stepped on during use.
5. Look at the seat belt: The seat belt must include at least one set of belts and one belt. The minimum width of the belt and chin strap should be 20mm, and the width of the shoulder strap should be 15mm minimum.
6, see the small parts: in the reach of the baby, there should be no small parts can be placed in the mouth. For non-detachable small parts, the baby should not be able to pull it with his fingers or teeth.
7. Look at the fabric: Avoid fabrics that are too brightly colored because the more vibrant fabrics add more chemical composition. The fabric part should be able to be removed and cleaned to ensure cleanliness and hygiene during continuous use.
8, whether there is a shock-proof structure: the health of the baby is a concern that parents have always been concerned about, not in any way wrong. Children's strollers must have a shockproof structure, we can push the baby to sneak at ease on the uneven road, or will take care of the baby.
9, seat pocket to be consistent with the baby's age: the baby under 6 months is best to lie flat in the cart, when selected to ensure that the open "small bed" flat, no obvious signs of bending at the fold, soft and hard Moderate, minimum internal height not less than 180mm. A cart with an angle of less than 150° between the backrest of the cart and the seat cushion is not suitable for babies under 6 months of age. Umbrella-shaped lightweight carts are not suitable for babies under 10 months because they do not support the backrest.
10, check whether the opening is convenient: In peacetime, my mother pushed the baby to buy food or shopping, some places need to fold up the child stroller, but if the stroller is not convenient to open, then folded up is also very troublesome, will Inconvenience to mothers. China Baby Carriage Industry Network arranges for you
Polyurethane rainwear
Polyurethane fabric, or PUL fabric, is a waterproof fabric, typically polyester, but may be cotton or a polyblend material that has been heat-laminated to a polyurethane layer. It is lightweight and extremely durable. These fabrics are used in several industries, from medical companies to the manufacture of diapers and active wear.
Polyurethane fabrics are lightweight and breathable. Typically, clothing made of this fabric is designed to hold its properties through at least 100 cycles in the washer and dryer without harm to the material. It is flexible and easy to work with and was originally designed for use in hospitals, where a reusable fabric that was strong and also waterproof was needed. Polyurethane fabrics can be manufactured in different thicknesses, depending on their intended use. For example, fabric used in diapers may be thinner than fabrics used for camping gear. Polyurethane fabrics are manufactured to feature a variety of characteristics. In situations where fuel contact is likely, the fabric can be made fire-retardant. It's also made airtight to resist water and humidity and is abrasion-resistant.
Advantages
1.Environmental protection, non-toxic, harmless and pollution-free
2.Long-lasting plasticity, recyclable
3.Does not deform or fade
4.Anti-UV and fire resistant
5.Good low temperature flexibility
6.Effectively resistant to harmful chemicals and industrial pollutants
7.The seam is formed by hot air welding, which is firm and reliable, and has long-term weld ability.
8.Smooth surface, not easy to stain, no need to clean
Pu Raincoat,Pu Rainwear,Outdoor Rainwear,Pu Adult Rainwear
Jinzhou City Hejin Clothing CO.,Ltd , https://www.hejin-cloth.com