New temperature shock test chamber should not be energized immediately
The manufacturer told us that the operation of the temperature shock test chamber compressor requires lubricant protection. Therefore, the manufacturer fills the refrigeration system with a certain amount of special lubricating oil in the production process. After the test chamber is completed, the lubricating oil and the refrigerant are finished. It is completely enclosed in the refrigeration system. The temperature shock test chamber has already been bumped, moved or even tilted for hours or days before being transported to the factory. At this time, the lubricating oil in the test tank will flow into the coil of the heat exchanger along the pipeline; A small amount of lubricating oil will also be injected into the compression chamber of the compressor under the action of bumps and vibrations, so that the test box will easily cause the test chamber refrigeration system to smash after being turned on. Therefore, for the sake of safety, the test box is placed for one to two hours after being energized. correct.
At the same time, in order to ensure the normal and safe use, the compressor and the condenser should also be cleaned regularly. After a period of use, the sanitary shock chamber should be cleaned.
Similarly, the test box should also pay attention to some problems during the maintenance process. First, clean it at least once a month. When cleaning the temperature and impact the test box, first cut off the power, use a soft cloth to rinse the water or dishwashing detergent, gently scrub, then Do not use detergent, decontamination powder, talcum powder, alkaline detergent, boiling water, oil, brush, etc. Clean the test box; again, when the accessories in the box are dirty and dirty, they should be removed with water or detergent. Wipe the surface of the electrical parts with a dry cloth. After cleaning, plug the power plug firmly and check if the temperature controller is installed. Set in the correct position; Finally, when the temperature impact test chamber is not used for a long time, the power plug should be unplugged, and the inside of the box should be wiped clean. After the box is fully dry, close the box door.
Shoe Wet Wipe,Shoe Wet Tissue,Shoe Wet Ones Hand Wipes,Shoe Wet Ones Wipes
DONGYANG COMEXA SANITARY PRODUCTDS LTD.,CO , https://www.comexawetwipes.com