The bedroom closet is also known for warmth and cold? Wardrobe maintenance temperature and humidity should be controlled

[China] wardrobe wardrobe network maintenance approach ten million kinds, for different materials and different wardrobe methods of care. But the most difficult thing to do is to count the wooden wardrobe, which has certain requirements for temperature and air humidity. How do we care for wooden sensitive wardrobes? To warm up the warmth of the wardrobe!

【temperature】

Wood is sensitive to temperature, and the change in temperature plus the inherent thermal expansion and contraction of the wood itself tends to deform the panel of the wardrobe.

1. The position of the wardrobe should be kept away from heat sources (for example, air conditioning vents, heaters, etc.), and the wardrobe should not be placed in direct sunlight.

2, try to choose the quality of the closet veneer, the quality of the closet veneer can withstand the impact of temperature changes, not easy to blister off.

【humidity】

Humidity is also an important aspect of the wardrobe. If the humidity of the air is too heavy, it will cause the slab closet to get wet for a long time. The sealing joint will expand and deform due to the increase of water content. If it is serious, it will cause the board to crack. Therefore, we should reduce it. Air humidity damage to the wardrobe.

1. From the source, the wardrobe should be placed close to the damp place (such as the toilet and bathroom), and the container with water should be placed next to the closet to avoid knocking over the wet wardrobe;

2, in the weather with high air humidity, you can use some dehumidifiers in the closet. At the same time, lime and dehumidifier can be used to reduce the indoor air humidity;

3. Choose a veneer with a low water absorption rate. If it is a solid wood veneer, you can choose ash and teak. The expansion and contraction rate is small, and the water absorption rate of maple is large, so you need to choose carefully;

4, protect the edge of the wardrobe sheet, avoid touching water or other solvents, otherwise it will easily appear off the edge. Edge sealing is very important for the moisture resistance of the wardrobe sheet, which can isolate the moisture in the air from the contact with the wardrobe sheet;

5. If the unfortunate wardrobe is drenched with water, you should take "emergency measures" at this time. You should immediately use a dry towel to remove the water, then use absorbent cotton or absorbent paper to blot the remaining water, or blow it off with a hair dryer, but avoid blowing the mouth too close to avoid damaging the wardrobe finish.

Customized Products(make your own brand)

BINGO HAIR COSMETIC MANUFACTURE LTD. , https://www.bingo-care.com