[ Chinese wardrobe net ] With the popularity of the walk-in cloakroom, this freely changeable, large and small "combination wardrobe " has become another mainstream product in the wardrobe design on the market today. Of course, the average family will not choose the cloakroom. Because the price is more expensive, and the simple combination wardrobe is liked by many ordinary users, the simple combination wardrobe has its certain advantages.
Advantages of simple combination wardrobe: non-woven fabric, good air permeability; painted round tube, iron wire, ABS engineering plastic material is more firm (not aging), stable structure, convenient installation and disassembly (only 20 minutes for installation according to drawings) ; Cost-effective products, anti-mite, moisture-proof, beautiful and generous.
First, the combination wardrobe size
The size of the combined wardrobe is not fixed, depending on the actual combination requirements. For example, a five-door wardrobe is composed of a three-door wardrobe and a two-door wardrobe. The three-door wardrobe can be 1200*600*2100mm, two-door wardrobe. It is 800*600*2100mm. The total size of the five-door wardrobe is 2000*600*2100mm. So everyone needs to choose the product according to the size of the bedroom.
Second, the combination wardrobe installation
The installation of the combination wardrobe is generally not too complicated. In order to let the customer know clearly how to install it, the installation steps have been minimized, and the interfaces are also prepared in advance. The user only needs to follow the installation diagram step by step. Pay special attention to the installation sequence and correctly install the components to the appropriate positions.
When installing a combination wardrobe, first make sure the bottom plate is secure. It is very important to lay a good foundation. If the bottom is not secure, the structure of the entire wardrobe will be unstable. When installing, pay attention to the interface to be aligned, install the document, shake it by hand without shaking, the bottom usually has drawers, you can not install first, first determine the frame, reserve the installation space.
After the bottom of the combination wardrobe is installed, install the back panel. Pay attention to keep the back panel and the bottom plate at a right angle of 90 degrees. Do not tilt. It is best to measure it carefully with a measuring tool to avoid errors. After installing the backboard, install the side panel and the top panel of the combination wardrobe. One side of the side panel is connected to the back panel, and one side is connected to the bottom panel. The board and the board are at a right angle of 90 degrees. The top panel is installed on the top of the wardrobe. Pay attention to the interface. Stable, secure it to the top.
Now, the general frame of the combination wardrobe has been established, and finally the remaining parts such as cabinet doors, laminates, clothes rails, clothes trays, drawers, etc. are installed. These combination wardrobe installation drawings are specifically marked, as long as the wardrobe is reserved according to the merchant. Space will be installed one by one.
Tables,Dining Table,Meeting table,coffee table,coffee table
Queen Furniture Co., Ltd. , https://www.queenfurnitures.com