The current steel-wood door market can be described as hot and hot, and there are many new steel-wood doors in the market. There are hundreds of pieces to thousands of yuan, the prices are different, the surface does not look too different, but the materials they use are of different quality. Pay special attention to detail when purchasing steel doors.
Steel-wood doors were quite popular a few years ago, but the filling of this door is a mixed wood. If you can smell the pungent smell, it may be that the quality of the wood is not enough, and the formaldehyde, benzene and xylene are over-expended. The thickness of the steel sheet material on the outer layer is lacking, or even too thin, so that it deforms after impact. However, in the procurement, in general, the sales staff will not emphasize these details.
However, the advantages of the steel-wood door itself are also obvious. For example, after almost two years of use, even the door of the bathroom will not be deformed by the damp, and the sound insulation effect of the door is quite good. Watching the stereo movie in the living room at night does not affect the rest of the elderly. Therefore, despite various defects, steel-wood doors still have a fixed market.
The thickness of the steel plate and the environmental protection of the wood. According to the relevant national standards, the steel plate thickness of steel doors cannot be less than 5m, but the products below this standard are everywhere, and consumers are not well-received. In terms of filling wood, the country has no regulations yet, and the environmental protection and moisture content of wood affect the quality of products.
Due to the diversification of market prices, the thickness of the steel plate is also different. If the surface of the product is flat, smooth and stable, the thickness of the steel plate should be 0.5mm and 0.5mm or more. The anti-collision and impact resistance can achieve good results. However, we also found that some of the inferior products on the market use 0.3mm or thinner steel plates, resulting in poor surface flatness and insufficient steel rigidity. Such products have seriously disrupted the normal competition order of the steel-wood interior door industry, damaged the interests of consumers, and brought more quality complaints and after-sales problems to the dealers of steel-wood doors. We suggest that the market firmly resist this inferior product. .
school bag
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycybag.com