Dense frame furniture installation process
Shelves, also known as intensive cabinets, are a type of intensive file installation that can be understood as follows: a shaft wheel is mounted on the base of a double-column double-sided holder, and a small rail that can be laid along the ground can be moved linearly. Move or separate multiple shelves as needed. When we carefully select the appropriate shelves, we have to wait for the manufacturers to ship. The shelves are relatively large in size, so they are separated when they are shipped, and they must be assembled at the destination. The following is a small series of the decoration home to introduce the installation process and requirements of the compact frame furniture and the details that need to be paid attention to during the installation.
First, the dense frame furniture installation process
1. Lay the track according to the corresponding size;
2. Assemble the chassis together;
3. Place the chassis on the track;
4. Insert the column into the chassis;
5. Connect the top chassis body;
6. Install the drive system and chain,
7. Connect the side panels and install the steering wheel;
8. Put the hanging board, shelf and partition;
9. Install the door panel;
10. Test adjustment installation is complete.
Second, the dense frame furniture installation requirements
1. Buried racks are required to be embedded in the track: the parallel deviation of each two rails is not more than 1.5mm, the horizontal deviation is not more than 1mm in any 1M length, and the total length is not more than 4mm.
2, the overall appearance of the compact frame requirements: After the installation and commissioning of the frame, it is required to achieve horizontal and vertical, the frame body is light and light without resistance and sound, and the frame is clean and tidy.
3. Box parallelism: ±1~2 mm/column. 4, the cabinet verticality: ± 1 ~ 2 mm / column. 5, the cabinet vertical synchronization: ± 1 ~ 2 mm / column.
Third, the dense frame furniture installation attention to detail processing
The slab is built on the steel track. The pulley, the bearing, the side chain, the wheel and the crank are combined to form the transmission system. The gear on the wheel is driven by shaking the rubber handle to pull the chain to The bearings of the chassis enable the single-row frame to move left and right. Therefore, if the track is not installed properly, it will affect the use of the shelf, and there will be certain security risks. When installing the shelves of the rack, be sure to ensure the level.
When the track is fixed, the chassis of the shelf is fixed, and then the column is fixed. It is very important to fix the column. It is the main component that supports the entire shelf. The key is to connect the screws with the chassis. Pay attention to the tightening when assembling.
When using a compact rack, the opening and closing of the compact rack is achieved by turning the rocker. Therefore, the drive shaker must be installed, and we must pay attention to the cooperation of the chain. Be sure to perform multiple commissionings after installation.
The compact frame is firmly and reliably installed, and the side panels are straight. Under full load, the components are not deformed, and the frame does not tilt.
Transmission system: When the rack is under load or no load, the opening and moving should be flexible and stable, and the handle is easy to shake. When the whole column is shaken, there is no shaking and no noise.
The contractor provided a 5-year warranty on the entire installation project, and there were problems during the warranty period. The contractor repaired and replaced the entire cost of repair and replacement.
The above content is the installation process and requirements of the compact furniture brought to you by this edition, and the details that need to be paid attention to when installing the dense home. I believe you will understand this after reading. For more information, please stay tuned to the home of the decoration. More and better home improvement content and the latest home improvement information are all in the home of the decoration.
More related wonderful reading:
How to choose the archive shelf installation method
Mobile Shelf Optional Method Mobile Shelf Features
What is the service life of the shelves? What are the buying skills?
How to move the shelves? Dump rack removal and disassembly repair steps
What is the intelligent rack? What is the role of intelligent shelves?
Bird Cage is an important environment for pet birds to conduct activities and inhabit. How important it is to choose a suitable cage for cute birds.
Cages with corners can let birds hide, give birds a full sense of security, and relieve mental tension.Prevent birds from suffering from depression due to long-term mental tension.
The Stainless Steel Bird Cage is very suitable for parrots, because parrots like to bite.
There are compartments and trays at the bottom of the cage to facilitate the collection of feces.
The open cage on the top can make the interaction between the owner and the bird easier, and it is also conducive to the owner's training of the bird.
It is necessary to place toys in the cage. When the owner has no time to accompany the bird, toys can attract the bird's attention and avoid depression.
The transparent acrylic cage is very convenient for the owner to observe birds, and it can prevent the wind and play a certain role in keeping warm.
Hanging cages are generally small in size and suitable for smaller birds.
Bird Cage,Pigeon Cage,Parrot Bird Cage,Bird Cages For Canaries
Mianyang Crossing Cross-Border E-Commerce Co., Ltd. , https://www.wycypet.com