How to release water for underfloor heating
In many homes in the north, floor heating is installed when the house is renovated to keep the room at a warm temperature. In order to ensure that the floor heating can work efficiently and have excellent heating performance, we need to drain the floor heating . So how does the floor heating release water , and when is it appropriate to give the floor heating, the following article will introduce it to everyone.
How to put water in the floor heating
1. First of all, we need to prepare a plastic pipe and insert it on the deflated valve, then close all the valves of the floor heating, and only keep the inlet valve open, we need to pay attention to if the valve and the pipeline Parallel state means open, if the pipeline is vertical, it means closed, don't make a mistake, the branch valve is based on the direction of the branch, and the pipe valve is based on its pipe position.
2. Then, you need to open the air release valve above the water inlet pipe of the water separator, and perform the first air release until the released water does not have a large number of bubbles before it can be closed.
How to put water in the floor heating
3. Next, open a group of inlet and return valves above the manifold branch, and then open the valves above the inlet pipe of the manifold, and also close after the discharged water does not contain a large number of bubbles.
4. Finally, repeat the above operation steps until all branches have completed the deflation work, then open all the valves, open the vent valve on the floor heating return pipe to discharge the water.
When is it appropriate to give floor heating water
1. The floor heating contains a lot of air
Usually, after a long time of use, underfloor heating will always have a little air entering the underfloor heating pipe, which will have a certain impact on the hot water circulation inside the underfloor heating, resulting in a decline in the heating capacity of the underfloor heating. The oxygen in it will also have a certain corrosive effect on the metal, so it is very necessary to warm the ground and release water at this time.
2. Prevent the pipeline from freezing in winter
Some people may not be able to adapt to floor heating in winter. If the weather is cold and hot, it will cause the water in your floor heating to freeze because the temperature is too low, and then it will squeeze the floor heating pipe after it expands. It will cause the floor heating pipe to break, so if the floor heating is not used in winter, it is best to drain the water in time.
3. Avoid blockage after heating period
Many people leave the floor heating aside or do not drain the water in time after the end of heating, which leads to the formation of scale in the pipeline after the chemical reaction, which affects the heating effect in the coming year. Therefore, the water needs to be discharged in time after the end of heating.
Summary of the article: The above is the relevant introduction on how to release the floor heating and when it is more suitable for the floor heating. I hope it can bring you a little help, let you understand the steps and time of the floor heating and drainage, let your floor heating supply normal, let everyone Are able to spend a warm winter.
What, the decoration still uses his own money? ! The Qi family is decorated in installments, with an ultra-low annual interest rate of 3.55% and a maximum loan of 1 million. Apply now to enjoy the discount
If you are interested in brand cooperation, content cooperation, and advertising of this website, please send an email to :.
NINGBO HOZ TRADING CO.,LTD , https://www.hoz-kitchenware.com