The drill of the electric binding machine is broken. How to remove it and how to press it up, in fact, the process is very simple. Xiaobian then prepared several methods for how to change the drill bit for the electric binding machine. Everyone should look at it according to their own situation.
How to change the drill bit for the electric binding machine:
1. Press the down button to stop at the appropriate position, and use the T-tool of the tool box to remove the electric binding machine. With the power as the power source, the automatic binding function can be realized by the motor-driven mechanism in the machine, the binding speed is fast, and the manual operation is reduced, and High accuracy and small footprint. The electric binding machine is widely used in offices, finance rooms, schools, government offices and other companies and units with document binding requirements.
2. Lower the punching knife first. You can see that there are two black hexagonal top wires on the cylinder with the knife. Use three hexagonal wrenches to unscrew the toolbox. The knife will come down. If the top wire is not loose yet, use a large pliers to clamp the knife body and find a hard thing to tap the pliers down. It may be that the tool holder and the knife sleeve are too tight. Give it a try!
3, drilling with line method: first open the power switch, the needle handle up and down continuously up and down four times, the hole line process has been completed.
Note: The drilling handle should be raised and lowered in place.
Troubleshooting:
When you find that the drill does not rotate during work, check if the hoe nut is too loose or the motor belt is too loose.
For example, when the second hole is drilled, the upper handle cannot be pulled, and the needle is checked for deviation. For the method of removing the needle, use the fingers to adjust the position of the needle before and after.
The above is a tutorial on how to change the drill for the electric binding machine written by Xiaobian for readers, hoping to help the readers.
Foot File,Plastic Handle Foot File,Foot Skin File,Feet Flat File
Yangjiang Etina Houseware Co., Ltd. , https://www.jmstjsrobot.com