Chandelier installation method and precautions do not believe
Everyone in life is how to effectively carry out the installation of the chandelier it? Because many families living room chandelier is broken, I do not know how to replace the installation, the installation of the chandelier what precautions to prevent strayed into misunderstanding, let's have a small series to find out more chandelier installation methods and precautions are what.
Chandelier installation method introduction
First, the installation method of chandeliers
1. Remove the hanging plate from the ceiling plate and align the hole on the western piece to select the appropriate position for installing the chandelier. If the vacancy is not aligned, pay attention to adjust the position of the screw.
2, then according to the installation bar on the ceiling to find the location where you need to install the chandelier hole, start drilling, select the appropriate size of the drill bit, use the electric rotation to play 6mm holes in the ceiling.
3. Insert the expansion bolt into the hole in the ceiling. You can use a hammer to knock the bolt into the hole, and then fix the chandelier hanging plate to the ceiling.
4. Wiring and fixing the chandelier lamp panel to turn off the power, connect the cable head that leaves the power supply to the lamp wire, wrap the tape, and then fix the lamp panel to the back bar.
Chandelier installation method
5. Install the bulb on the lamp panel and take out the bulb carefully. Screw it on the lamp panel. When each bulb is installed, remember to turn on the light test to ensure the normal use of the chandelier.
6. Install the accessories related to the chandelier according to the instructions. Take out the parts inside the package and install them according to the instructions of the drawings. The accessories are hung. According to the style of the crystal chandelier, there are different accessories, some are only bulbs, some include crystal balls and crystal strips. , beads and other accessories. After all the hangs, check that the accessories are complete and properly hanged to ensure safety, then open the crystal chandelier to see the effect.
Second, chandelier installation precautions
1. If there are multiple chandeliers during installation, pay attention to their position and length. Install the chandelier at the same time as installing the ceiling. This can adjust the position and height of the lamp based on the ceiling joists.
2. The method of direct exit and casing can be used for the roof of the boom. The method of adding the pipe is advantageous for the installation, and the roof panel can be ensured to be complete, and only the hole where the pipe is required to be taken out can be drilled. Straight out of the ceiling of the hanging cup, the board surface drilling is not easy to find. Sometimes it is possible to install the boom first and then cut off the panel to install the hole, but it has an effect on the decorative effect.
3, the boom should have a certain length of thread, in order to adjust the height. Suspend the light box below the sling boom, pay attention to the reliability of the connection.
Chandelier installation precautions
The above is the installation method and precautions for the chandelier shared by you , and I hope to help you. If you want to know more about chandelier installation, please continue to pay attention to the net. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action!
Blend Essential Oil,Star Anise Oil,Jasmine Oil,Essential Oil Kits
Ji'An ZhongXiang Natural Plants Co.,Ltd. , https://www.zxnaturaloils.com