Band saw machine safe operation
1. Before starting the machine, carefully check whether the saw blade has crack joints. Is the tension of the saw blade tight? The normal band saw sports car band saw should be replaced according to the width of the saw blade!
2. It should be stopped when adjusting the saw card. It is strictly forbidden to loosen the saw card when the saw blade rotates.
3, can not just move the guardrails on both ends of the sports car band saw, the sports car band saw after the start of the track can not be extraordinary!
4, the ordinary band saw sports car band saw saw speed should be based on the material, the ordinary band saw upper and lower saw hand should be good with the hand should be flat, turn the material to be stable, the pendulum into the saw, the hand must go steady, the hand to prevent the clip When the saw is fed back, it is not allowed to collide with the saw blade. The speed of the band saw is just slow when the saw is inserted. When the speed is changed, the fork should be noticed to prevent the sliver.
5. Ordinary band saws should be used when longitudinally sectioning the wood. The vertical guides should be used in parallel with the saw blade. The saws should be solidly sawed. When the saws are cut out, the saws can be picked up and the following materials can be used. Pull hooks.
6, the material fine woodworking band saw operation when the hand to leave the saw blade above the material should not be too sharp sawing the arc when the angle should not be too large to push the material can not push the sharp turn to prevent the saw blade.
7. Remove the turpentine and sawdust on the saw blade. Use a long-handled brush with kerosene or diesel to wipe the brush. The hand should be at an angle to the saw blade. When the band saw machine is stopped, the wood brake can not be used. The passive wheel and the saw blade can avoid the irreparable accident caused by the difference of the rotation speed of the upper and lower wheels and can not push the sawing edge with the wood in the inertia rotation of the saw blade!
8. If the saw blade is found to be moving on the saw wheel before and after the band saw machine is running, it should be stopped for inspection.
Travertine Side Table
side tables for living room luxury,stone side table,round stone table
Kumusi (Dongguan) Furniture Co., Ltd. , https://www.kcoffeetable.com