What if the crystal lamp is dirty? Xiaobian has a coup
The bright and beautiful appearance of the crystal lamp, if it is dirty, not only affects the beauty of the crystal lamp itself, but also reduces the refractive index of the crystal lamp. After using for a while, we need to clean the crystal lamp. Let's take a look at the method of cleaning the crystal lamp and the things to be aware of when cleaning!
crystal Light
First, the method of cleaning the crystal lamp
1, detergent
Choose a professional crystal lamp cleaner, spray it on the crystal lamp, the cleaning agent will be volatilized together with dust and stains, and then air-dried before installation.
2, disassembly cleaning
Remove the crystals one by one, dip them into a container containing kerosene, and gently wipe the crystal appearance with a toothbrush. After the dust of the appearance is slowly softened, wash the crystal blocks with detergent powder. In addition, according to the quality of the detailed crystal lamps, the treatment is treated differently, and the soft cotton cloth is selected for wiping. The principle of symmetry should be followed when disassembling the crystal pendant to keep the luminaire balanced and the bracket not deformed. Do not use alcohol when wiping the gold-plated metal bracket, so as not to damage the plating film and affect the appearance. To avoid leaving fingerprints on the crystal lamps, wear white cotton gloves when cleaning the crystal lamps.
Method of cleaning crystal lamps
3, please professional cleaning crystal lamp
If the bead string is to be removed and cleaned, the large-scale lamp should pay attention to the balance of the lamp body when the bead string is removed. Do not remove the side and then remove the other side to cause the lamp body to tilt, resulting in deformation of the lamp body or the outer frame. It should be disassembled with front and rear. Wipe the bracket assembly to avoid letting the liquid touch the crystal light. When wiping the brackets and accessories, do not touch the soft cloth with water, especially alcohol, so as not to damage the protective film outside the plating layer and affect the surface gloss effect of the lamp holder. Avoid too much effort when installing. The bulb should also be removed and wiped clean before being installed. When the bulb is screwed in, it should be moderate. If it is too loose, it will cause poor contact. If it is too tight, it may screw the bulb. Replace parts at the right time. It was found that the beaded connection buckle was rust-discolored, and it was not beautiful, and the two were easily brittle and replaced by the way. If the bead string is found to be missing, it should be completed in time.
Second, cleaning precautions
1. Cleaning should not be washed with corrosive liquid such as detergent to avoid damage to the plating film.
2, cleaning can not be used sharp equipment cleaning to avoid scratching.
3, be quick to disassemble, pay attention to the brute force. Remember the steps to prevent errors when reinstalling.
4. Pay special attention to cut off the power switch.
Cleaning precautions
The above is the method of cleaning the crystal lamp shared by you and the related knowledge of the things to be aware of when cleaning. I hope to help you. If you want to know more about crystal lamps, please continue to pay attention to the net. Get a quote for 10 seconds and get four sets of design solutions for free. You can also follow the whole process of decorating the housekeeper and take action!
Pet Bag,Portable Carriers Bags,Soft Pet Backpack,Pet Bag Backpack
Yangzhou Pet's Products CO.,LTD , https://www.paiqipets.com