[ Chinese wardrobe network ] In the autumn, the temperature is slowly getting cold, and the air is getting more and more dry. At this time, the wardrobe in the home is facing the test. How to maintain the wardrobe is a problem that every family cares about. In fact, as long as it pays attention to the maintenance work in the details, the wardrobe can safely survive the harsh weather in autumn.
1. For wardrobes with drawers, it is recommended to drop a few drops of wax on the bottom of the drawer or the drawer (frame) to reduce friction and extend the service life.
Second, the new wardrobe sometimes makes a "squeaky" sound, which is due to the normal phenomenon caused by the shrinking of the wardrobe panel.
Third, although it is necessary to increase the humidity, it is best not to let the closet and the high humidity objects get too close.
4. When placing in the closet, pay attention to keep away from the heat source, at least one meter or so. The closeness of the closet from the heat source will quickly cause the moisture in the wardrobe wood to evaporate too much, causing the seams and crevices of the closet to shrink, causing deformation and cracking of the panel. It is best to wipe the beeswax on the back and inside of the closet.
5. Increase indoor humidity as much as possible. If you often wipe the floor with a damp cloth or use a humidifier or fish, it is good for people and wardrobes, and also adds fun to life.
Sixth, when the wardrobe moves, it is best to move and move, do not pull hard, otherwise it will easily cause the lower end of the leg and leg.
7. Do not wipe the wardrobe dust with a damp cloth. The correct way is to gently rub the surface of the wardrobe and wipe it with a clean cotton cloth to prevent the particles from damaging the surface of the wardrobe.
Eight, improve the regular maintenance awareness of the wardrobe. It is best to maintain the beeswax for the maintenance of the new wardrobe in three months, six months and one year, so that the wardrobe will appear as soon as possible. This not only increases the appearance of the wardrobe but also extends the life of the wardrobe.
Nine, the wardrobe should be placed in a flat position, and the four legs should be placed on a flat surface as much as possible. The overall wardrobe should be perpendicular to the ground, otherwise it will easily cause deformation of the whole wardrobe and the door, etc., eventually causing seams to be sewn and detrimental to the life of the wardrobe.
Ten, it is best to give the wardrobe a hot wax. According to normal, the newly bought wardrobe can not be hot, but it needs to be clear whether the wardrobe has been made of traditional hot wax, waxing and waxing before leaving the factory. If it is done, it can be no longer hot. If not, it is best. Blow it again. Although this is a labor-intensive process, it is not harmful to the wardrobe, and some manufacturers do not burn as required. It is a pity.
Over Bed Tables are highly convenient for those who need to spend most of their time lying in bed. Bedside tables are commonly used in hospital rooms to make a situation more convenient by wheeling the table over the mattress for eating, reading or simply to rest anything on a flat surface.
The U and H shaped base allows the table to be remain in place over the bed, even when the user is moving or sleeping. Swivel casters allow the over bed table to be easily transported from room to room.
We supply a range of over bed tables including fixed flat tables, along with split top versions that make reading, drawing and using electronics easier and more comfortable. The height adjustable frame enables the table to be used over a wide variety of beds and chairs. A wipe clean surface and sturdy construction make this ideal for home and facility use.
Over Bed Table,Bedside Dining Table,Bedside Medical Table,Air Drive Over Bed Table
Jiangmen Jia Mei Medical Products Co.,Ltd. , https://www.jmmedicalequipment.com