First, the manuscript section
1. Standard size of the business card: After making a finished draft, the size of the hemorrhage is 92×56mm, each side of the bleeding is 1mm, and the net size after cutting is 90×54mm, which is also the corresponding up, down, left and right plus 1mm. At the same time to indicate the size of the finished product, the location of the fold line and whether to press the line.
2, 16 billing page size: After the completion of the draft size of 213 × 288mm bleeding, bleeding on all sides of 1.5mm, the net size after cutting 210 × 285mm; if you want to cut small sheet, each small sheet also bleeding 1.5mm, fight After opening 16, the total size must not exceed 213 x 288mm.
3. Envelope: The finished product is spread out and weighed 434 × 368mm after bleeding. The bleeding on each side is 3mm. The net size of the finished product is 214 × 300mm (the tongue height is 62mm).
4. It is not necessary to draw crosshairs or cutting lines when the manuscript is completed. Please be sure to do bleeding, if your art does not make blood, please change it!
Second, the text (number) part
1. There must be errors in cutting, and the arrangement of the copy should be more than 3mm away from the cutting line so as not to cut the text when cropping.
2. After the manuscript is confirmed, the text should be converted into a curve (path, contouring) so as to avoid the loss of garbled characters and text due to the lack of fonts during the output of the plate. If it is a text box, please turn it into an artist's character and then change the curve.
3. Please don't set the system word when inputting text. If it is used, it will cause a white node in the staggered part of the stroke.
Third, the color part
1. The color of the finished product cannot be requested by the color of a computer screen or printout. All colors must be filled with C, M, Y, and K, and no RGB or other disc labeling colors are allowed. The sum of the four colors of C, M, Y, and K in the heavy color system must not be greater than 250, otherwise there will be backprinting. The pale colors of the C, M, Y, and K colors must not be less than 5, or they will not be printed.
2. Since color business cards belong to imposition printing, when the same image file is printed at different times (ink volume control will be different each time), the color will be somewhat different, and the color difference within the upper and lower 10 percent is normal.
3, the color of the color block Please try to avoid the use of dark or full version of the combination of colors, or printing after the cut is easy to produce back prints, flash edges and edges cut out of the situation. Because of the small amount of business card printing, there are areas of the same large areas on the front and back, and it is generally difficult to ensure consistency and no ink spots. (Recommendations for large blocks are all over dumb glue).
4. The setting of the shading or background color should not be less than 10% so as to avoid rendering the finished product.
5. Do not use overprinting (especially reverse printing, such as overprinting if the finished product is not available), channel masking, filling of unclosed curves, coloring lines, OLE objects, and filter effects.
6. Images and photos should be produced in CMYK mode. Do not use the PSD file format input. Please fill in all the input image maps, POWERCLIP objects, separated drop shadows, and use transparency or filter materials. Diagram. The color is set to CMYK32 bits, the resolution is 350dpi, and the anti-aliasing compensation transparent background is checked with the color profile file to avoid sometimes having to rotate the plate output to cause the Masek image. If you want to adjust the node to reduce the bitmap, please also transfer the bitmap again to avoid partial hiding of the output.
Fourth, the drawing part
1. For all input or self-drawn lines, such as color blocks, the thickness of the wire frame should not be set less than 0.1mm. Otherwise, the printed products will be broken or unable to be presented.
(If the fill is a wire mesh frame, it is recommended to fill 30% mesh, wire 0.176mm or more)
2. When the gradient object is placed in the frame and it is accurately cut, turn it into a bitmap, because if the placed frame is rotated with other object groups, its gradient direction will not rotate together.
3. The “edge width†cannot be set for any gradient object. Because the interpretation of the output machine is different, sometimes the gradient edge fill is insufficient.
V. Check before delivery
1, CorelDRAW production cards regardless of single, double-sided, regardless of the number of models, how much, all production and storage of the same page, the front on the left, the back on the right.
2, JPG format, please import CorelDRAW file inside, and put it out as required.
3. Confirm that the manuscript is to be printed. All objects in the document should not be locked. It will cause the object to be lost or displaced during the imposition. Do not use the background of the page or the bottom of the page as the bottom of the manuscript.
4, special attention to any pictures, color blocks or lines beyond the production size, please be placed in the box. Do not cover with a white color block, so as to avoid the trouble of imposition.
5, please try not to set full version color blocks, can not use C100, M100, Y100, K100 or C75, M68, Y67, K90 four color black color fill, the ink will not be dry, there will be back printing , Please check with a pipette tool.
6, full version of the ink to blacker, please set K100 + C30, you can make the black color saturation, and do not design on the black color text, there will be a leak.
7. When designing a business card with a lace or a frame, please make a width of at least 5mm so as to avoid unevenness of the four sides due to uneven cutting.
8. CorelDRAW file Please check the file information. If there is an OLE object, you need to convert the object into a bitmap. Otherwise, the object will not be printed.
9. When you make a double-fold business card, the top should be a "reverse" image, and you must attach the finished product proofs to avoid mistakes.
10, the requirements and contact information and so on in the document (such as whether the film, the pressure line, the number of boxes, single-sided, paper, contact telephone, contacts, shipping address), in order to facilitate our contact and delivery