How to choose which water heaters to choose from?

As a common bathroom appliance, water heaters are an electrical appliance that people use more frequently. So since the frequency of use of water heaters is so high, in the daily use process, there will always be some problems of large and small. Once there is such a problem, what maintenance methods can we refer to?

What are the water heater repair methods?

The first step of repairing the water heater: the first use of the water heater (or a new section is not used and re-used) because the water heater heating time is short, the upper and lower water temperature is not uniform, resulting in less hot water treatment: Continuous use of water heater work 12 More than an hour, the water temperature inside the water heater is evenly distributed.

The second step of repairing the water heater: During the heating process of the water heater, the water droplets of the safety valve are dripped out. Treatment method: close the water inlet valve and adjust the water mixing valve knob to a high temperature to avoid the water leakage phenomenon of the one-way safety valve. Let the water drip out of the shower. If the mixing valve is not installed, the hot water ball valve can be opened a little, where the pressure can be drained, and the leakage of the one-way safety valve can be avoided.

The third step of repairing the water heater: During the use, the leakage protection plug is automatically powered off (regular automatic trip), press the reset button to reset and restore the power supply. Solution: 1. Replace the high-quality socket (optional plug, pull force is relatively large, the plug is bitten tightly after plugging in); 2. Check the copper pins of the leakage protection plug. If it is black, use it. The fine sandpaper wipes off the oxide layer. If the pin is deformed, it should be corrected. The three copper feet should be kept perpendicular to the bottom surface and cannot be bent.

How to choose a water heater

In the selection of water heaters, what skills can we refer to? When selecting, be sure to specify the number of users in the home in advance, because if there are only 2 people in the family, you buy a 60~80L water heater, obviously not only consumes electricity, but also the purchase price. High, usually, it is very suitable for 2 people to use 40~50L.

Before buying, it is also very important to check whether there is a suitable switch socket in the hanging area in advance. Especially when the distribution of some old houses is relatively old, it is necessary to confirm whether the electricity environment can meet the needs of the water heater, otherwise it is not possible to buy it home. It is a waste. This is also a better way.

When you want to buy a water heater, you can refer to this method. Consumers must check the brand and after-sales service level of electric water heaters. The quality of brand-name products is generally good, after-sales, and they can enjoy a series of services such as door-to-door installation and free machines.

When the water heater fails, with the above introduction, you can repair the water heater according to the specific situation. If the water heater in your home is also faulty, you can refer to the above description of the steps to repair the water heater to see if there is a suitable repair method.