Analysis of the test method of the salt spray test chamber

Analysis of the test method of the salt spray test chamber

The salt spray test chamber is an environmental test that uses artificially simulated salt spray environmental conditions created by salt spray test equipment to determine the corrosion resistance of products or metal materials. The severity of the test depends on the duration of exposure. Laboratory simulated salt spray can be divided into three categories: neutral salt spray test, acetate salt spray test, and copper salt accelerated acetate salt spray test.

The neutral salt spray test (NSS test) is the earliest and most widely used accelerated corrosion test method. It uses 5% sodium chloride salt water solution, and the PH value of the solution is adjusted to a neutral range (6.5 ~ 7.2) as a spray solution. The test temperature is 35 ℃, and the sedimentation rate of salt spray is required to be 1 ~ 2ml / 80cm / h.

Acetic acid salt spray test (ASS test) is developed on the basis of neutral salt spray test. It is to add some glacial acetic acid to the 5% sodium chloride solution, so that the pH value of the solution is reduced to about 3, the solution becomes acidic, and the salt mist formed finally becomes acidic from the neutral salt mist. Its corrosion rate is about 3 times faster than the NSS test.

The copper salt accelerated acetate salt spray test (CASS test) is a fast salt spray corrosion test recently developed abroad. The test temperature is 50 ° C. A small amount of copper salt-copper chloride is added to the salt solution to strongly induce corrosion. Its corrosion rate is about 8 times that of the NSS test.

The Multi-layer Kraft Paper Bags is made of high quality kraft paper, and the outer layer is white kraft paper.  The inner layer is yellow kraft paper;  Four layers of yellow kraft paper can also be used;  The strength of kraft paper is high and the toughness is good.  And it can be coated with waterproof membrane on one layer of paper;  Waterproof and moisture-proof;  The bottom and upper mouth use  seam or hot melt adhesive sealing method;  It can be lined with a PE lining bag or aluminum bag,  This packing bag is suitable for packaging:  pigments,  dyes,  starch, food additives,  plastics,  chemical products,  pharmaceutical raw materials,  carbon black, etc.Multi-layer kraft paper bagsMulti-layer kraft paper bag

Multi-Layer Kraft Paper Bags

Multi-Layer Kraft Paper Bags,Multi-Layer Kraft Paper Cement Bag,Kraft Paper Bags,Multi-Layer Aseptic Bags

Shenzhen Riversky Packing Materials CO.,LTD , https://www.jtfibc.com