2. The relation between the edition and the book placement method. At present, there are two types of staples commonly used: one is to put signatures on a page in the order of page number, and then use iron wire binding, lock stitching, and wireless glue binding; The booklet is set on the outside or inside of another booklet in the order of page numbers, and the cover is booked with a saddle stitch. Various staple methods have different requirements for the titling process.
When the flat-booking method is adopted, the requirement for the skewing process is that the first post and the last post of each post should be entire posts as much as possible, and a page less than one post should be divided between two whole posts for the binding process. Collisions, transmissions, and pre-book assignments.
The sewing thread setting is generally applied to thicker books, and the book backs are stitched together when binding. In order to facilitate sewing, for fractional pages with less than 8 pages, it should be placed on top of another entire poster. If there is a single page, it can be stuck on the front or back side of a certain signature. , then set the lock line.
When using saddle stitching, it is required to put the whole post on the inside of the book block and the zero page on the outermost side so that when the book is booked, the rules of the book are neat and transmitted smoothly. The method of riding into a book is different from other books. Therefore, the typo method is special. That is, the first half of the folded book is the front page of the book, and the second half is the last page of the book. For example, for a 16-page, 64-page journal, full-page machine printing is used. The first page (ie, outer page) should have 1 to 16 and 49 to 64 page numbers, and the second page should be The page numbers 17 to 48 should be placed. Figure 2-19 shows the titling method for the first page.
Figure 2-19 saddle stitch version
3. The relationship between the version and cutting. Before the folding of the single-page printing page, the folding machine and the folding rules should be used as much as possible during the printing to ensure the accuracy and folding quality of the folding rules.
(to be continued)