The application of solid phase extraction technology is becoming more and more extensive. The following three aspects summarize the application of solid phase extraction technology in water analysis.
1. Pretreatment of pesticide residues in water
For the determination of pesticide residues in water, non-polar adsorbents such as C18 and C8 are generally used, and methanol is usually used as the eluent. Due to strict requirements on pesticide residue limits in water bodies, the mass concentration of pesticide residues in natural water bodies is also usually very low. Without reliable separation and enrichment methods, it is difficult to detect, using solid phase extraction of Tianjin Hengao Technology Development Co., Ltd. The device can complete the extraction, enrichment and purification in one step. Pre-concentrate a large volume of sample through a solid phase extraction column, elute with a small volume of eluent, and then concentrate to a fixed volume for detection, which greatly reduces the detection limit of the detection method.
2. Pretreatment of organic matter in water
We know that organic matter can remain relatively stable in environments such as ponds and reservoirs, but once it enters the sampling bottle, it will change quickly, so organic matter analysis requires immediate analysis.
Because the solid phase extraction equipment is simple, small in size and easy to carry, it can do sampling and pre-processing. The sampler brought back to the laboratory the solid phase extraction column, not the water sample. This will ensure that the water sample data we process is accurate.
In the monitoring of urban water supply and water quality, five kinds of trichlorfon, dichlorvos, dimethoate, methyl parathion, parathion, and parathion were measured in the determination of organophosphorus pesticide indicators. Solid phase extraction of Tianjin Hengao Technology Development Co., Ltd. The device is used for measurement, that is, a solid phase extraction column is used to adsorb trace organic phosphorus pesticides in water, eluted with a mixture of methanol and acetone, concentrated, and then measured by flame photometric detector (FPD) gas chromatography.
3. Pretreatment of phenolic compounds in water
In the monitoring of urban water supply quality, in the determination of indicators of phenolic compounds, a total of 5 compounds of 4-nitrophenol, 3-methylphenol, 2.4-dichlorophenol, 2.4.6-trichlorophenol and pentachlorophenol were measured It can be measured by the solid phase extraction device of Tianjin Hengao Technology Development Co., Ltd. The solid phase extraction column is used as the enrichment column to enrich the phenolic compounds in the water. Or C8 chromatographic column, using A: methanol acetic acid solution, B: acetic acid solution as the eluent for gradient elution, using a programmable ultraviolet detector or array diode detector for measurement.
For water supply companies and water quality monitoring organizations, cost-effective domestic SPE devices can save time and costs. Industry experts, enterprises, and water quality monitoring organizations are welcome to pay attention to our products. We look forward to the comprehensive improvement of drinking water quality!
Chests of drawers have traditionally been made and used for storing clothing , especially underwear , socks, and other items not normally hung in or otherwise stored in a closet . They are usually placed in a bedroom for this purpose, but can actually be used to store anything that will fit inside and can be placed anywhere in a house or another place. Various personal sundry items are also often stored in a chest of drawers. It has a long history as one of the stand-bys of a carpenter's workshop. A typical chest is approximately rectangular in overall shape and often has short legs at the bottom corners for placement on the floor.
Chests of drawers often come in 5-, 6-, and 7-drawer varieties, with either a single or a double top drawer. The chest illustrated at right would be described as a '5 over 2 chest-on-chest', the latter term deriving from the fact that at one time it would have been made as 2 separable pieces. They are commonly made of wood, similar to many other kinds of furniture, but of course can be made of other materials. The inside of the drawers can be accessed by pulling them out at the front side. It is often placed so that the back side faces a wall since access to the back is not necessary. The lateral sides are also usually made such that they can be placed against a wall or in a corner. Although they can be plain in appearance, chests of drawers can also be made with a fancy or ornamental appearance, including finishes and various external color tones. Traditionally, drawers would slide out on smooth wood rails. Most modern cabinets use roll-out shelf sliders, made of metal, with rollers.
Drawer Chest,Chest Of Drawers,White Chest Of Drawers,Modern Drawer Chest
Shenzhen Guang Disen Furniture co.,ltd , https://www.gdisenfurniture.com