Features of UV aging test box
The inner tank of the UV aging test box is made of imported high-grade stainless steel, and the outer tank of the box is sprayed with A3 steel plate, which increases the appearance and cleanliness of the UV aging test box. The test box is formed by using the most advanced processing equipment in China, and the surface of the shell is sprayed with plastic, which is beautiful and smooth. Coordinated color matching and smooth lines. Avoid the disadvantages of using aluminum plate surface spraying to cause surface damage after long-term use. The ultraviolet aging test box (ultraviolet aging test machine) studio is equipped with a humidification heater, liquid level switch, blackboard temperature sensor, etc. In addition, eight ultraviolet radiation fluorescent lamps and ultraviolet radiation meters are installed. The high-quality fixed PU movable wheels are installed on the bottom of the machine, which can easily move the machine to the designated position and finally fix the casters.
The heating method is inner tank water tank heating, with rapid temperature rise and uniform temperature distribution.
The drainage system uses vortex and U-shaped sedimentation devices to drain, which is convenient for users to clean
The temperature sensor is connected with a black aluminum plate, and the heating is controlled by a blackboard temperature meter, and the temperature is more stable.
The radiometer probe is fixed and does not need to be loaded and unloaded every time.
The radiation amount adopts a special ultraviolet irradiator with high-precision display and measurement.
The radiance of the ultraviolet weather resistance test chamber is not more than 50W / m.
Illumination and condensation can be controlled independently and can be controlled alternately.
The independent control time of light and condensation and the time of alternating cycle control can be set arbitrarily within a thousand hours.
Self Adhesive Rubber Feet, also known as self adhesive Rubber Feet&Foot and Self Adhesive Rubber Mat, which is made of rubber material with backing adhesive tape (glue layer) and produced by compression molding and die-cutting tool. Self Adhesive Rubber Foot are widely applied in Electronics, Medical, Vehicle, Electronic, Automotives, etc.
Self Adhesive Rubber Pad and Mat
Self Adhesive Rubber Pad,Self Adhesive Rubber Mat,Custom Self Adhesive Rubber Mat,Rubber Pad Feet
Xiamen The Answers Trade Co.,Ltd. , https://www.answerssilicone.com